Performance Products For The Rest Of Us
Made in the USA
Like us on
Facebook!

Ford Gen II Mini-Starter – PN 3026

RobbMc Ford Y-Block/Early FE Gen II Mini-Starter

$269.00



Applications: (See notes at bottom of page for more info)

  • 1956-1964 239-312 Y-Block Series V8
  • 1954-1955 239-312 Y-Block Series V8 (if converted to 12V)
  • 1958-1964 331-428 FE Series V8 with 153 Tooth ring gear
  • 1961-1964 223 L6
  • 1954-1960 383/410/430/462 MEL Series V8 Lincoln (12 volt only)

Compare RobbMc Starters with other starters

PN 2012   Replacement Nose

Also known as the mounting block.

$49.00



PN 3020   Replacement Gen II Solenoid

Fits Gen II starters. Solenoid is held to starter with two screws.

$25.00



Notes:

  • This starter has a register diameter of 4.083" and is designed for ring gears that are 3/4" from the starter mounting surface.
  • This starter is 7-11/16" long from the mounting surface to the end of the motor.
  • The solenoid can be rotated to any position without taking the starter apart. We recommend positioning the solenoid under the starter motor and towards the oil pan. This makes it easier to connect the battery cable and keeps the solenoid away from exhaust heat.
  • This starter replaces the early Ford “centrifugal” or “inertia” type starters that have a long shaft extending into the bellhousing.
  • Replaces Lester numbers 3110, 3115, 3123

RobbMc Gen II Ministarter Installation Instructions and Troubleshooting Guide
Note: Microsoft Word is required to view/print this document.


Top of Page Back to Products Page