Buick Gen II Mini-Starter – PN 3000

Applications:

Buick 300/340/350/400/430/455 V8
Buick 3.8/4.1L V6 (except front wheel drive)

Compare RobbMc Starters with other starters

$311.00

PN 2025 Pinion Support Modification

Prevents pinion gear deflection on hard to start engines. Deflection can damage the pinion gear, the flywheel ring gear, and even the starter gear reduction assembly. Recommended for engines with any of the following:

Over 500 cubic inches
Over 11 to 1 compression ratio
Crank trigger ignitions
Magneto ignitions
More than 18° of ignition advance during cranking
Locked out or no distributor advance
Electronic start retard
Any engine that may kick-back during cranking

$38.00

PN 3020 Replacement Gen II Solenoid

Fits Gen II starters. Solenoid is held to starter with two screws.

$25.00

Notes:

This starter is 7–7/16" long from the center of the mounting bolts to the end of the motor.
The solenoid can be rotated to any position without taking the starter apart. We recommend positioning the solenoid under the starter motor and towards the oil pan. This makes it easier to connect the battery cable and keeps the solenoid away from exhaust heat.
This starter uses standard OEM length mounting bolts available at any auto parts store. Use only true starter bolts, which have knurls on the shank.